3.5-7kW AC Portable Charging Gun: Selection Guide and Technical Insights

What Is a 3.5-7kW AC Portable Charging Gun?

The 3.5-7KW AC Portable Charging Gun is a compact, mobile EV charger designed for Level 2 AC charging. It offers selectable output currents ( 16A or 32A) to deliver 3.5kW or 7kW charging power. This product connects to standard IEC 62196 Type 2 vehicle inlets and is compatible with CEE or Schuko plugs. Its portable form factor makes it suitable for home use, workplace charging, and roadside emergency backup.

Why Choose a Portable Charging Gun Over Fixed Stations?

Fixed charging stations offer high power and network connectivity, but they lack mobility. A portable charging gun provides three distinct benefits:

• Flexibility: Can be carried in the trunk and used at any location with a compatible outlet.
• Cost savings: Lower upfront investment compared to wall-mounted stations.
• Multi-vehicle support: One device can serve multiple EVs in a fleet or household without additional infrastructure.

For businesses that require temporary charging setups at events or construction sites, the 3.5-7kW portable charger is a practical solution. Its power level is sufficient for overnight charging of most EVs (e.g., adding ~25-50 km range per hour at 7kW).

How to Select the Right Portable Charging Gun?

When evaluating portable AC chargers, consider the following technical parameters:

The Soutya portable charging gun meets all these criteria. It features selectable current settings (8/10/13/16/32A) via a built-in control panel, allowing users to adjust power based on outlet capacity. The cable is rated for over 10,000 bending cycles, complying with EN 50620 standards for durability.

Which Safety Standards Apply to AC Portable Charging Guns?

Portable EV chargers must adhere to international safety regulations. The relevant standards include:

• IEC 62196-1 & -2: Defines plug, socket, and vehicle connector requirements for AC charging. The Type 2 connector used in the Soutya gun is fully compliant.
• EN 50620:2017: Specifies cable requirements for EV charging, including flexibility, flame retardancy, and resistance to UV and oil.
• IEC 60364-7-722: Covers electrical installations for EV charging, including RCD protection and grounding.

The Soutya product incorporates an integrated residual current device (RCD) Type A and overvoltage protection, ensuring safe operation in accordance with these standards.

Asked Questions

Conclusion

The 3.5-7KW AC Portable Charging Gun from Soutya is a reliable, standards-compliant solution for flexible EV charging. Its selectable power output, robust safety features, and compliance with IEC 62196 and EN 50620 make it suitable for both individual and commercial use. For B2B buyers, this product offers a cost-effective entry into mobile charging infrastructure.

References
[1] IEC 62196-1:2022. Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 1: General requirements.
[2] EN 50620:2017. Electric cables for charging of electric vehicles.
[3] IEC 60364-7-722:2018. Low-voltage electrical installations – Part 7-722: Requirements for special installations or locations – Supply of electric vehicles.