The 1000V DC Combiner Box 4 In 2 Out Isolator type, supplied by China manufacturer Zhejiang Soutya New Energy LLC, is designed for photovoltaic systems, delivering surge protection, isolation protection, leakage protection and grounding protection on the DC side of solar installations.
▶ Configuration: 2 DC surge protectors; 8 DC fuse holders; 2 cage-type DC isolator switches
The 1000V DC Combiner Box 4 In 2 Out Isolator type, supplied by China
manufacturer Zhejiang Soutya New Energy LLC, is a 1000 V DC PV combiner unit
featuring a fire-retardant PC enclosure and IP66 protection that ensures
high durability and reliable outdoor performance. The device integrates
critical safety components including 2 DC surge protective devices, 8 DC
fuse holders, and 2 cage-type DC isolator switches. It is designed to
deliver comprehensive isolation protection, leakage protection and grounding
protection in 4-string photovoltaic systems.
Technical Parameter
Configuration
DCSPD*2Pcs
DC Fuse holder*4Pcs
DC Isolator Switch*2Pcs
SYS5-40P/2P
SYF5-32P
SYDSC-32
▶ Maximum Working Voltage: 1500VDC
▶ With illuminated indicator for clear fuse status
identification
▶ Rated insulation voltage: 1500VDC
▶ Compliance Standard: IEC/EN 61643-31
▶ Rated operational voltage: 1000VDC
▶ Rated current: 32A
▶ Maximum Discharge Current: 40kA
▶ Fuse link specification: 10x38mm, 16A
Specifications
4 Input / 2 Output, 1000V DC (Configuration 1)
Input
4-circuit
Output
2-circuit
Maximum Voltage
1000V
Maximum DC Short-Circuit Current (Input)
16A (Replaceable)
Maximum Output Current
32A
Distribution Box Parameters
Material
PC+ABS
Ingress Protection (IP) Rating
IP66
Impact Protection Rating (IK)
IK09
Dimensions (L×W×H)
GNB F01-26; L296*W390*H130mm
Cable Input Port
PG09 Cable Gland, 2.5 - 16mm2
Cable Output Port
PG21, 2.5 - 16mm2
Environment
Operating Temperature
-20°C - +60°C
Humidity
99%
Altitude
2000m
Mounting Method
Wall-mounted
Wiring Diagram
Application scenarios
1.4-String Commercial Rooftop
Built for big-box stores, workshops and warehouses running four PV strings
across wide roofs. The box merges them into two independent outputs, so one
inverter can feed the shop floor while another backs up the office. Twin
rotary isolators give lock-out in seconds, and IP66 keeps dust storms and
hose-downs out.
2.Solar Farm Sub-Arrays
Slides onto combiner tables in 1–10 MW solar farms. Four sub-arrays come in,
two homerun cables go out—each with its own isolator—letting O&M crews
shut down half the field for string replacement without touching the rest.
Dual SPDs swallow nearby lightning hits.
3.High-Power Agriculture
Clips to barn walls or pivot-irrigated fields where four strings power pumps
and grain dryers. Individual fuses per string stop a ground fault in one
line from killing the whole crop water supply. UV-stable IP66 shell laughs
at fertilizer dust and daily wash-downs.
4.Solar-Storage Hybrids
Mounts on the battery hut: four strings in, output A to the hybrid inverter,
output B to the MPPT charger. Either path can be isolated with a twist of
its own handle, so techs can swap batteries or reboot the inverter without
darkening the critical load.
5.Remote Telecom / Off-Grid Stations
Straps to the pole behind four slimline panels feeding redundant DC rings
for radios and sensors. Fire-retardant, IP66 enclosure survives -40 °C
nights and desert sun, while the two output legs keep comms gear alive even
when one side is down for service.
Hot Tags: 1000V DC Combiner Box 4 In 2 Out Isolator type
East of No.148, Wei 12th Road, Economic Development
Zone,Yanpan Subdistrict,Yueqing City,Wenzhou,Zhejiang
Province,China
For inquiries about DC Combiner Box, Charging Pile, Circuit Breaker or price list, please leave your email to us and we will be in touch within 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.Privacy Policy